|
|
|
|
|
Li On Hing,
I use a LaCie Neil Poulton 500G Hard Disk for recording by MTV 3000 (ver 2.06). However, around 2-3 times out of 10, there is a message that the USB harddisk is USB 1.0/1.1. With such message, the recording of TVBHD is jerky and the file size is around half of normal, i.e. around 3G/hr. I've brought the MTV3000 and LaCie harddisk to your office and checked OK. I also brought the LaCie to the distributor and also checked OK. However, the problem still persist. Could you please advise how this problem can be solved. |
|
|
|
|
|
|
|
|
Li On Hing,
When will the new firmware come ?  |
|
|
|
|
|
|
|
|
|
will go for MagicTV, thx sir! |
|
|
|
|
|
|
|
|
hi arziarzo, 畫面唔會震, many MagicTV users use 日版電視 
regards,
Li On |
|
|
|
|
|
|
|
|
IShin hing, yes we will improve the new channel 83 handling! 
regards,
Li On |
|
|
|
|
|
|
|
|
Hi Li On and PeterLie hing.
the newly opened channel 83 uses the YELLOW button for 互動功能
which collides with audio selection button MTV currently assigns to.
When TVBar 提示is on, and 1st time i enter channel 83
the 提示 shows and the press yellow button will be audio selection instead.
I am looking forward for a fix in coming firmware.
Thanks  |
|
http://mtvlab.blogspot.com/
|
|
|
|
|
|
|
謝謝 Li On 兄 回覆。
希望盡快出喇。  |
|
|
|
|
|
|
|
|
Hi Arcadeez, yes the next firmware will support formatting up to 1T harddrive.
Hi Spy, looks like harddrive issue. Please try another short USB cable. If using 2.5" harddrive, even using both USB ports, the power maybe still not enough. You can also bring both the MTV3000 and USB harddrive to our office to check.
Hi tuning, firmware 2.03 beta or older, Component output does not support 1080p. When 1080p is selected, HDMI outputs in 1080p and Component outputs only 576i/480i. From 2.05 beta and up, both HDMI and Component output in 1080p. If your display does not support Component 1080p, please select a lower output resolution.
hi AlexleeHKG, unless the MagicTV has hardware problem, "爆格" or "no/poor signal" simply means the antenna digital TV reception quality is poor. The handheld signal meter can only show the overall signal strenght (db level) but there may be many signal noise or interference and cause the poor digital TV signal. If you have the MagicTV is faulty, please come to our office to check.
regards,
Li On |
|
|
|
|
|
|
|
|
借問會唔會有新 firmware 可 support format 1TB o既 harddrive？
我用過 Parted Magic ，試左 2 日都 format 唔到我部 Western Digital external 1T。
我做法係先 delete 成個 partition 變成 empty，然後再 create Primary o既 Ext2。
全程只有呢兩個動作，但每當 delete 完 partition 後做 ext2 formatting 時，
大約 5 分鐘，個 program (GParted) 自己 quit。
再試其他方法，例如先 format Fat32，再 format ext2，都係自己 quite。
然後再試，MTV3000 format，佢會 format 成為兩個 ext2 (640Gb + 300GB 左右)，
我再比 GParted 去 delete 300GB，然後再 resize 640Gb 成為 1T，但成個過程佢話要十幾二十粒鐘。 
其實我做錯左乜？
請大師指點，謝謝！ |
|
|
|
|
|
|
|
|
Dear LiOn,
小弟用緊部 MTV3000(firmware: v2.06),經常地邊錄影就邊睇Playback,不過有個問題係有時睇playback的時候會忽然會hold左係度(由其按fastforward 或 跳前30秒之類很易出事),
於是按"Live"出番去啦.雖不知連錄影都停埋,而且有時會顯示"USB裝置已移除"然後再顯示番"發現可用USB裝置"之後又好似正常番.
試過兩款HDD(WD 500G Passport , Stardom Ext HDD Case + WD 640G 32M , Format 同樣是用EXT2)都有試過呢個情況.
有冇其他C.Hing有類似問題. 是BUG嗎?
Thanks! |
|
|
|
|
|
|
|
|
Dear LiOn & PeterLie,
Thanks for your continous support on this forum.
I have been using MTV3000 since January 2008. I am using both the Sony CRT TV and JVC HD-1 Projector. Component inputs was connected to Sony CRT TV and HDMI to HD-1. Each firmware has given different response from my CRT TV. In firmware 2.03b. My TV have stable display when set to 1080P 50 as well as my projector. After the most recent 2.06 firmware upgrade and some previous firmwares. My CRT TV can only have correct display to 576i 50. Not the other format. My projector will have incorrect display scale (4:3) even I have set it to 16:9. May I know why the unstable display on different firmwares ?
Thanks & regards,
Tuning. |
|
|
|
|
|
|
|
|
HI, AlexleeHKG
我家中有 MTV5000 及 MTV3000 x2部, 你的個案, 我都有呢個經驗.
(我家中2間房都是用MTV3000, 廳中的原裝天線插位用 MTV5000)
當我用MTV5000 看85號台, 間中都會爆格或跳一兩秒無聲, 不過好快就自動回復正常,
但是同一時間, 房間中2台MTV3000都是正常收看, 沒有爆格亦沒有跳聲.
當看過你的個案, 我又去看我的接收值, MTV5000的接收95%-100%(100%畫質)
MV3000 都是大約 75% - 85%(100%畫質)
所以我相信爆格同接收無關, 而software的可能性, 直係要 LiOn大人幫助看看了. |
|
|
|
|
|
|
|
|
Hi Li On,
I bought a MTV5000 2 months ago, I notice that there are "爆格" or no/weak signal around 1 to 2 times per hour on channel 35 (Jade HD). I exchange a new one from fortress after 7 days of use.
Then, I also experience the same problem "爆格" or no/weak signal".
The symptom are as follow:
1) When viewing Jade HD (85), "爆格" or no/weak signal around 1 to 2 times per hour.
2) Whenever there is "爆格", it last for 30s to 60s, and most of time return normal, but sometimes, STB reboot.
3) During the "爆格", if I disconnect the antenna or change channel (e.g. from channel 35 to 37), then the screen return to normal immediately.
4) If I change the channel every 15 mins, the problem seems will not happen.
5) Whenever there is "爆格" on my TV, there is no problem on my neighbour's TV (I can watch their TV over the windows)
6) Recorded video also have problem. Therefore, If I record 1 hour of HDTV, there is always 1 or 2 mins error.
7) There is no problem on SD channel.
I did upgrade the STB to latest firmware (1.10), but problem is still same as before.
I called the hotline, the engineer told me that it is most likely the signal problem.
OK. I told the building management to check the signal.
First, they change to another port of the signal spilter outside my flat. But, problem is still there.
Second time, they brought a meter (with signal graph shown) to check at my home. The reading is ~65dB, and C/N or C/M = 40+, and a "good" is shown. They confirm the signal is good and there is no other complain from other users on the same building.
Today, I bought a HDTV card installed to my PC, connect to the same antenna, and watch Jade HD from PC and STB at the same time. When there is "爆格" on TV, there is no problem on my PC. So, It seems the problem on the STB.
I found the picture quality is good on MTV (better than my HDTV card on PC), but it is not stable.
Hope the MTV engineer are focusing on the stability of the STB.
Thanks and regards |
|
|
|
|
|
|
|
|
|
想問一個簡單問題,睇同錄影時可否取消左上角個(節目重溫)同紅色(錄影中)呢?唔該 |
|
|
|
|
|
|
|
|
hi gilman, please reconnect the USB cable and make sure the cable connection is solid. You may also try another short USB cable, or connect the USB on the other USB port of the MTV3000. If you still have problem, please bring the MagicTV and the USB harddrive to us to check whether it's the MTV3000 or the USB harddrive problem.
regards,
Li On |
|
|
|
|
|
|
|
|
Hi Li On,我尋日試過即錄即番無問題...睇番之前lag果d節目都無事..試左幾次都無事~
之後熄左機隔左幾個鐘再試..起初都無事...但後來prompt左個msg出黎話移除左我個hdd..
跟住又prompt多個msg出黎話裝左個usb 1.0既裝置會影響錄影...跟住試所有錄左張節目都lag啦...
可能之前我一開MTV就開埋個HDD先開LCD...所以無留意到部MTV應左我個外置HDD做usb 1.0..
咁幾實係部MTV既USB有問題定係我個外置盒有問題?定係2個device唔夾呢? Thx~ |
|
|
|
|
|
|
|
|
hi gilman, is the problem occur on both SD/HD channel, or only on HD channel? Please try viewing the MagicTV while recording to make sure there is no reception signal problem.
Please power Off/On both the MagicTV and the USB harddrive and try again. Please try another USB cable, or another USB harddrive. If you still have problem, please call our hotline 26556768 to arrange to bring the MagicTV and the USB harddrive to our office to check.
regards,
Li On |
|
|
|
|
|
|
|
|
|
你買番來有冇用MTV3000 format一次，用Fat32錄影無咁穩定。 |
|
|
|
|
|
|
|
|
|
咁多位師兄...小弟剛剛買了個western digitial 640gb HDD 用usb2.0既hdd盒駁落部MTV3000(用緊2.06 firmware)...rec節目無問題..睇到rec左幾多分鐘...但play果陣就好lag...有聲有畫面...但就lag到睇唔到咁制...想請教師兄們係發生咩問題?Thz! |
|
|
|
|
|
|
|
|
|
oh ~ 明白晒 !明白晒 ! |
|
|
|
|
|
|
|
|
|
裸族 esata + usb 冇 auto power on/off功能的，暫時只有Century裸族cooling fan(model:CROSU2F)有此功能，而且加了風扇後，大大降低HDD的温度，售價$390。 |
|
|
|
|
|
對不起，您必須在留言前Login
按這裡 login
|
|
|
|
|
